Ceramic pots are made from clay and are fired at high temperatures, so they are usually very durable. However, when not properly cared for and stored, they can still crack and break. So let’s learn about preventing cracks in ceramic pots with Viet Thanh Ceramics through the article below:
1. Causes of cracked pots
1.1. Changing temperature too quickly
When the pot undergoes a rapid change in temperature, such as from high to low temperature or vice versa, uneven expansion and contraction in the ceramic material can cause pressure and create cracks.
When the pot undergoes a rapid change in temperature, such as from high to low temperature or vice versa, uneven expansion and contraction in the ceramic material can cause pressure and create cracks.
1.2. Strong impact
Strong impacts can cause cracks or potted basins. This can happen when the pot is colliding with other hard objects or when the pot is dropped from a height.
Strong impact will cause the pot to crack.
1.3. Non-uniform material
If the ceramic pot is made from a heterogeneous material or has unevenness in the structure, it can easily crack when subjected to stress or temperature changes.
1.4.Lack of durability
The pot may crack if it is not heated at a sufficiently high temperature or not fired properly. This can reduce the strength and cracking resistance of the pot.
1.5.Using damaged ceramic pots
If the pot has been cracked or damaged before, continued use of it may result in widespread cracking.
Poor quality ceramic pots will crack quickly.
1.6. Uneven impact force
When the pot is subjected to uneven impact, such as when one part of the pot is heavier than the rest, it can cause uneven pressure and lead to cracking.
1.7. Improper manufacturing process
If the production process is not carried out properly, such as using unsatisfactory raw materials or failing to control the firing process, the ceramic pot may crack.
2.
2.1. Avoid rapid temperature changes
When using pots, limit temperature changes too quickly. For example, do not place cold pots in hot water or vice versa.
Avoid rapid temperature changes
When using the pot to store hot water, be sure to pour in the hot water gradually. Start by pouring a small amount of hot water, then wait a while for the pot to adjust to the new temperature before pouring more hot water.
2.2. Avoid strong impacts
Limit strong impacts, especially in areas with large temperature variations. When moving, be careful and gentle to avoid strong impacts. Use a handle or protective belt to secure the basin and avoid slipping your hands. Avoid placing the pot in areas where there is a high risk of impact, such as near doors or where there is a lot of movement.
2.3. Use high quality products
Choose to buy good quality ceramic pots from reliable manufacturers. Good quality pots are usually made from high-quality raw materials and fired at the right temperature, which increases durability and crack resistance.
2.4. Proper cleaning and maintenance
Proper cleaning and storage of ceramic pots also helps prevent cracking. Limit the use of harsh cleaners or rubbing too hard, as they may damage the surface of the pot. Also, limit the contact of ceramic pots with strong acidic or alkaline liquids.
Clean properly
2.6. Place the ceramic pot correctly
Place the ceramic pot on a flat and stable surface, such as a table or stand, to prevent the pot from deflecting or swaying, reducing the risk of bumps and cracks in the pot.
Place the ceramic pot on an insulated pad, such as a rubber pad or thick cloth to reduce the temperature difference and avoid direct contact with cold surfaces, reducing the risk of pot cracking.
Place ceramic pots correctly
Check that the ceramic pot is balanced. If the pot is misaligned or unbalanced, adjust it by adding or removing soil from the pot until it stands upright.
3.Summary
Ceramic pots are made from high-quality clay material, and the precise firing process will create a highly durable ceramic pot. However, how to use and store ceramic pots will determine whether the pots crack and break quickly. Please store it carefully so that you can use the pot for a long time.
4. Viet Thanh Ceramic Corporation
Viet Thanh Ceramics Joint Stock Company (VICERCO) is a prestigious and successful enterprise established in 1982. The company specializes in the direct production and export of all kinds of ceramic and handicraft products with high quality.
With more than 40 years of experience in the ceramic industry, Viet Thanh has affirmed its position as one of the leading manufacturers and exporters of ceramic products in Vietnam. The company’s products are exported to many markets around the world and are highly valued for their quality as well as aesthetics.
Viet Thanh not only produces traditional ceramic products but also focuses on innovation and creativity. The company is constantly researching and developing new designs to meet the diverse needs of domestic and foreign customers. With a team of skilled workers, modern technology and a consistent commitment to quality, Viet Thanh is proud to be one of the leading ceramic enterprises in Vietnam.
If you are interested, for more information, please contact the company via the contact information below:
Phuc Nguyen – General Manager – phucnguyen@vicerco.vn
Tel: (+84) 251 395 4312 – Hotline: (+84) 914 292 636
Tien Nguyen – Sale Executive – sale01.pottery@vicerco.vn
Hien Nguyen – Production Manager – hiennguyen@vicerco.vn
Tien Nguyen – Sale Executive – sale01.pottery@vicerco.vn
Trang Le – Sale Executive – trangle@vicerco.vn
The above is information about the address of Bien Hoa ceramic pot production. If possible, please register to visit the Viet Thanh ceramic pot factory to witness the ceramic making process and choose your favorite product!
